OSS Message Pedia

Edit Message

Edit mid:14124

alert

You need to sing in to edit content.

Edit content(*:Mandatory item)

Message*:
Arguments:	host:: SCSI Host No. channel:: SCSI Channel No. id:: SCSI ID lun:: SCSI LUN result:: code representing the error
Explanation*:	An error occurred on a [http://en.wikipedia.org/wiki/SCSI SCSI]（Small Computer System Interface）device shown in the message with the corresponding SCSI number. A code refered by ''result'' consists of five pieces of the detailed error information. It's represented by 8 digit hexadecimal number in the format: 0x VW XX YY ZZ. The meaning of the each part is as follows: [[BR]] V： error code to show actions after the error 0＝normal 1＝retry others＝idle [[BR]] Ｗ： error on the driver layer 0＝normal 4＝common error 6＝timeout 8＝sense error others＝idle [[BR]] XX： error on host 00＝normal 01＝timeout（fail to connect） 02＝timeout（fail to access because of the bus being busy） 03＝other timeout 04＝a designated error of a target device 05＝commands to be terminated abnormality 06＝parity error 07＝internal error 08＝commands to reset 09＝unexpected interrupt 0a＝taking back an error to upper layer 0b＝requesting a retry by lower layer 0c＝a command not to reduce a retry count others＝idle [[BR]] YY： message code 01＝expanded message code 02＝an HBA port stores the current data pointer 03＝an HBA port restore the data pointer stored 04＝the target closing the connection 05＝an error on HBA port 06＝the target terminates abnormally the current command 07＝never processing the last message 08＝idle status 09＝parity error 0a＝completion of command group 0b＝completion of command group 0c＝LU reset 20＝treating the command as HEAD OF QUEUE 21＝treating the command as ORDERED 22＝treating the command as SIMPLE ※ http://www.t10.org/ftp/t10/drafts/spi2/spi2r20a.pdf [[BR]] ZZ： error on the device.The ZZ&0xfe value is equal to the error code 00＝normal 02＝Completion of preparing SENSE data 04＝It expresses completion of a specific command 08＝LU busy 10＝normal 14＝It expresses completion of a specific command 18＝interfering in the RESERVE state 22＝LU busy 28＝resource deficit of the HBA port side 30＝detecting an ACA (Auto Contingent Allegiance) state 40＝The command being canceled by other HBA ports ※ http://www.t10.org/ftp/t10/drafts/sam3/sam3r14.pdf
Category*:	(default:priorityと同じ)
Action:	In most cases, one or more additional error messages regarding the SCSI device will be displayed with more concreate information after this message. The recommended action would depend on such the possilbe succeding messages.
Misc:
Example:	SCSI error : <0 0 0 1> return code = 0x70000

Message Data

Message*:
Software*:	(readonly)
Version*:	(readonly)
Distribution	(readonly)
path name*:
Line Number*:
Priority*:
Config: